Bedroom lighting has an unusual job: it has to be bright enough to get dressed and clean, then disappear when you want to sleep. This plan lights a typical main bedroom with numbers from our calculators.
How much light the room needs
The lumens calculator puts a 168 sq ft bedroom at about 1,680–3,360 lumens. That's low compared with a kitchen, and most of it should be dimmable. The same room needs very different light at 7 a.m. and 11 p.m.
Layer 1: ceiling light or fan
With an 8 ft ceiling, only flush or semi-flush fixtures fit. The room light calculator suggests about 24–28″ wide and no more than 12″ deep.
Many bedrooms use a ceiling fan instead. The ceiling fan calculator suggests a 44–50″ fan for this room, flush-mounted (a "hugger"), which keeps the blades just above 7 ft. With such a low ceiling, choose a fan with a slim built-in LED light rather than a hanging light kit, so nothing hangs below the blades.
Either way, the ceiling light usually ends up in the middle of the room, over the foot of the bed. That's fine for a flush fixture or fan. Avoid a hanging fixture there, which you'd see glaring every time you lie down.
Layer 2: bedside reading lights
Wall sconces free up the nightstands and put light exactly where you read. The sconce calculator centers them over each 22″ nightstand, which puts them 82″ apart (41″ each side of the bed's center line). With the mattress top at 25″, mount them with their centers 45–55″ above the floor, 20–30″ above the mattress. Swing-arm sconces let each person aim the light at their book without lighting the other side of the bed.
No wiring at the bed wall? Plug-in sconces with a cord cover, or a pair of table lamps about 30″ tall, do the same job.
Layer 3: low and night light
- Closet: a strip or puck light inside the closet, ideally switched by the door opening. Use CRI 90+ so navy and black look different.
- Dresser lamp: a small lamp gives soft evening light without the ceiling fixture.
- Night path: a motion-sensing strip under the bed or a plug-in night light by the door, as dim and warm as possible.
Color temperature
Use 2700K for everything in a bedroom. Studies on sleep suggest bright, bluer light in the evening can delay feeling sleepy, so warm, dim light is the better choice at night. "Dim-to-warm" bulbs, which shift toward 2200K as they dim, suit the ceiling light well. See color temperature by room.
Shopping list
| Fixture | How many | Size | Placement | Light |
|---|---|---|---|---|
| Flush ceiling light, or hugger fan with built-in light | 1 | Light 24–28″ wide, or fan 44–50″ | Center of the room | 1,600–2,400 lm, 2700K, dimmable |
| Swing-arm wall sconces | 2 | Over each nightstand, 82″ apart, centers 45–55″ high | About 450 lm each, 2700K | |
| Closet light | 1 | Inside the closet | 2700–3000K, CRI 90+ | |
| Dresser lamp | 1 | On the dresser | About 450 lm, 2700K | |
| Motion night light | 1 | Under the bed or by the door | Very low, warm |
Switching
The most-missed detail in bedrooms is being able to turn off the main light from bed. Use a three-way switch, a smart dimmer with a remote, or a fan with a remote. Each sconce gets its own switch on the fixture or right by the bed, so one person can read while the other sleeps.
Mistakes to avoid
- Recessed lights over the bed, which shine straight into your eyes when you lie down.
- Cool 4000K bulbs, which make a bedroom feel like a hotel corridor at night.
- Sconces mounted too low, where your head blocks the light, or too high, where they light the ceiling instead of the page.