How far apart should recessed lights be?
The standard rule is to divide the ceiling height by two. The light from each fixture spreads in a cone, and at that spacing the cones meet at about head height, so the floor gets even light without dark patches between fixtures.
| Ceiling | Between lights | From the walls |
|---|---|---|
| 8 ft (2.44 m) | 4 ft (1.22 m) | 2 ft (0.61 m) |
| 9 ft (2.74 m) | 4½ ft (1.37 m) | 2¼ ft (0.69 m) |
| 10 ft (3.05 m) | 5 ft (1.52 m) | 2½ ft (0.76 m) |
| 12 ft (3.66 m) | 6 ft (1.83 m) | 3 ft (0.91 m) |
Treat these as a starting point. Fixtures with a wide beam can go a little farther apart, and narrow-beam spotlights need to be closer. The fixture's spec sheet sometimes lists a "spacing criterion" that gives the exact figure for that model.
How many recessed lights do I need?
Divide each wall's length by the spacing and round to the nearest whole number. That's how many lights fit along it. Multiply the two numbers to get the total, then spread each row evenly so it's centered on the room.
Example: a 14 × 12 ft kitchen with an 8 ft ceiling. 14 ÷ 4 = 3.5, round to 4 lights along the length, 3½ ft apart. 12 ÷ 4 = 3 lights along the width, 4 ft apart. That's a 4 × 3 grid of 12 lights, with the outer rows 1¾ ft and 2 ft from the walls.
Then check brightness. Twelve 650-lumen lights give 7,800 lumens. A 168 sq ft kitchen needs about 5,000–6,700 for general light, so this layout is slightly bright, which a dimmer handles well. The calculator runs this check for you.
How far from the wall should recessed lights be?
Sources disagree here. Some put the first row a full half ceiling height from the wall, about 4 ft with an 8 ft ceiling. Philips suggests 1½–2 ft, and others say anywhere from 1½ to 3 ft. We use half the spacing between lights. It keeps the grid even, and on an 8 ft ceiling it lands at 2 ft, inside everyone's range.
There's one exception. When a wall has art, shelves or cabinets you want lit, bring that row to 2–3 ft from the wall so the light washes down it. In a kitchen, center the lights over the front edge of the counters, so you aren't standing in your own shadow while you work.
4-inch or 6-inch recessed lights?
The size of the opening matters less than its beam angle and lumens. 4″ lights look neater and are the usual choice in kitchens, bathrooms and modern rooms. 6″ lights spread light a little wider and are common in living rooms and on higher ceilings. Mixing sizes in one room looks untidy, so pick one and use it throughout.
How bright should the room be?
| Room | Foot-candles | Lux | Lumens per 100 sq ft |
|---|---|---|---|
| Hallway or stairs | 5–10 | 54–108 | 500–1,000 |
| Living room, bedroom | 10–20 | 108–215 | 1,000–2,000 |
| Kitchen (general), dining | 30–40 | 323–431 | 3,000–4,000 |
| Home office | 30–50 | 323–538 | 3,000–5,000 |
| Bathroom, kitchen counters | 70–80 | 753–861 | 7,000–8,000 |
The lumens calculator works this out for any room and explains where sources disagree.
Before you cut
- Insulated ceilings need IC-rated fixtures, which are safe in contact with insulation. Airtight (ICAT) versions also stop warm air leaking into the attic.
- Joists and ducts may sit exactly where a light should go. Shifting a whole row a few inches is fine. Shifting one light breaks the grid.
- Dimmers must be compatible with LED fixtures, or the lights may flicker or buzz. See why LED lights flicker on a dimmer.