Every number on this page comes from those three rules, worked out for the sizes people actually have. Find your table or room, read across, and you have a size range to shop with. For a size that isn't listed, or to see the result drawn to scale, use the chandelier calculator.
Round and square tables
For a round table, use its diameter. For a square table, use the length of one side. The upper limit also keeps the fixture at least 6″ inside the table's edge.
| Table | Usually seats | Chandelier width | In cm |
|---|---|---|---|
| 36″ (91 cm) | 2–4 | 18–24″ | 46–61 cm |
| 42″ (107 cm) | 4 | 21–28″ | 53–71 cm |
| 48″ (122 cm) | 4–6 | 24–32″ | 61–81 cm |
| 54″ (137 cm) | 5–6 | 27–36″ | 69–91 cm |
| 60″ (152 cm) | 6–8 | 30–40″ | 76–102 cm |
| 72″ (183 cm) | 8–10 | 36–48″ | 91–122 cm |
Rectangular tables, with linear fixtures
A round chandelier is sized to the table's width. Once a table is at least 72″ long and about 1.6 times longer than it is wide, a linear fixture usually fits better. Size it to ½–⅔ of the table length, ending at least 12″ before each end.
| Table | Round chandelier | Linear fixture |
|---|---|---|
| 60 × 36″ (152 × 91 cm) | 18–24″ (46–61 cm) | Round is the better fit |
| 72 × 36″ (183 × 91 cm) | 18–24″ (46–61 cm) | 36–48″ (91–122 cm) |
| 72 × 40″ (183 × 102 cm) | 20–27″ (51–68 cm) | 36–48″ (91–122 cm) |
| 84 × 40″ (213 × 102 cm) | 20–27″ (51–68 cm) | 42–56″ (107–142 cm) |
| 96 × 42″ (244 × 107 cm) | 21–28″ (53–71 cm) | 48–64″ (122–163 cm) |
| 108 × 44″ (274 × 112 cm) | 22–29″ (56–75 cm) | 54–72″ (137–183 cm) |
| 120 × 44″ (305 × 112 cm) | 22–29″ (56–75 cm) | 60–80″ (152–203 cm) |
On tables 96″ and longer, two matching round chandeliers are another option. Hang them a quarter of the way in from each end, and size each one to the round column or a little smaller.
By room size
Use this chart when nothing sits under the fixture: an entry, a living room, a bedroom. Add the room's length and width in feet, and that number in inches is the width. In metric, add the length and width in meters and multiply by 8.3 to get centimeters.
| Room | Width | In cm |
|---|---|---|
| 10 × 10 ft (3.0 × 3.0 m) | 20″ | 51 cm |
| 10 × 12 ft (3.0 × 3.7 m) | 22″ | 56 cm |
| 12 × 12 ft (3.7 × 3.7 m) | 24″ | 61 cm |
| 12 × 14 ft (3.7 × 4.3 m) | 26″ | 66 cm |
| 14 × 14 ft (4.3 × 4.3 m) | 28″ | 71 cm |
| 14 × 16 ft (4.3 × 4.9 m) | 30″ | 76 cm |
| 16 × 18 ft (4.9 × 5.5 m) | 34″ | 86 cm |
| 18 × 20 ft (5.5 × 6.1 m) | 38″ | 97 cm |
| 20 × 20 ft (6.1 × 6.1 m) | 40″ | 102 cm |
A two-story foyer can take a few inches more than the chart, because the fixture is seen from farther away. If a dining room is very small, check this chart against the table chart and use the smaller number.
Fixture height by ceiling
The height of the fixture body, not counting chain, should be 2.5–3″ for every foot of ceiling. Over open floor, the 7 ft headroom rule caps how far the fixture and its chain can drop, which is why low ceilings need flush mounts whatever the proportion rule says.
| Ceiling | Fixture height | Most drop over open floor |
|---|---|---|
| 8 ft (2.44 m) | 20–24″ (51–61 cm) | 12″ (30 cm): use a flush mount |
| 9 ft (2.74 m) | 23–27″ (57–69 cm) | 24″ (61 cm) |
| 10 ft (3.05 m) | 25–30″ (64–76 cm) | 36″ (91 cm) |
| 11 ft (3.35 m) | 28–33″ (70–84 cm) | 48″ (122 cm) |
| 12 ft (3.66 m) | 30–36″ (76–91 cm) | 60″ (152 cm) |
| 14 ft (4.27 m) | 35–42″ (89–107 cm) | 84″ (213 cm) |
| 16 ft (4.88 m) | 40–48″ (102–122 cm) | 108″ (274 cm) |
| 18 ft (5.49 m) | 45–54″ (114–137 cm) | 132″ (335 cm) |
Over a table, the drop limit doesn't apply in the same way, because nobody walks there. The height rules for that case are in how high to hang a chandelier.
Reading product listings
- "Diameter" or "width" is the measurement to compare with these charts. For a linear fixture, use its length.
- "Height" on a listing usually means the fixture body only. "Overall height" or "maximum height" includes the chain or rod at full length.
- Crystals and drops count toward both width and height. They're part of what people see, and part of what they can bump into.