Guide

How High to Hang a Chandelier

Quick answer: over a dining table, hang the bottom of the chandelier 30–36″ (76–91 cm) above the tabletop with an 8 ft ceiling, and about 3″ higher for each extra foot of ceiling. Anywhere people walk underneath, keep at least 7 ft (213 cm) between the floor and the lowest point of the fixture.

There are really only two rules for chandelier height, and which one applies depends on what's under the light. If it hangs over furniture, like a dining table or an island, you measure up from the furniture. If people walk under it, you measure up from the floor and keep 7 ft clear. Everything below is those two rules applied to real rooms.

Quick reference by room

Measure to the lowest point of the fixture, including any crystals or drops
WhereRule8 ft ceiling10 ft ceiling
Over a dining table30–36″ above the table, +3″ per extra foot60–66″ above floor66–72″ above floor
Over a kitchen island30–36″ above the counter, +3″ per extra foot66–72″ above floor72–78″ above floor
Living room, bedroom, entryAt least 7 ft clear belowFlush or semi-flush onlyBottom at 7 ft or higher
Two-story foyerCenter on the upstairs window, never below 7 ftn/an/a
StairwellAt least 7 ft above the stair directly belowFlush mountMeasure from the stair
Over a bathtubAt least 8 ft above the tub rim (US code)Not allowedBottom 8 ft+ above rim

Over a dining table

With an 8 ft ceiling, the bottom of the chandelier should sit 30–36″ above the tabletop. That's low enough to light the table and make the fixture feel connected to it, and high enough that seated people can see each other underneath. With a taller ceiling, raise it about 3″ for every extra foot so the fixture doesn't look like it's dropping out of a tall room.

The same 24″ chandelier over a 72″ table. With a 10 ft ceiling it moves up from 33″ to 39″ above the table, so it keeps the same relationship to the room.
Bottom of the chandelier over a standard 30″ (76 cm) table
CeilingAbove the tableAbove the floor
8 ft (2.44 m)30–36″ (76–91 cm)60–66″ (152–168 cm)
9 ft (2.74 m)33–39″ (84–99 cm)63–69″ (160–175 cm)
10 ft (3.05 m)36–42″ (91–107 cm)66–72″ (168–183 cm)
11 ft (3.35 m)39–45″ (99–114 cm)69–75″ (175–191 cm)
12 ft (3.66 m)42–48″ (107–122 cm)72–78″ (183–198 cm)

We stop adding height at 12 ft. Above that, raising the fixture further disconnects it from the table. Fill the extra space with a taller or tiered chandelier instead, and keep the bottom in the 12 ft range.

Where the guides disagree

Lighting retailers don't publish one number. Wayfair's guide gives 30–36″ above the table. Some UK lighting shops suggest a lower 28–32″, and others land on 32–34″. The overlap, roughly 30–34″ with an 8 ft ceiling, is safe in almost any dining room. We compared 19 guides in detail in our lighting guides study. If your chairs have tall backs or your family is tall, use the top of the range.

A test that settles it: once the fixture is up, sit down and look across the table. You should see the face of the person opposite you below the fixture. If a shade or crystals block that view, raise it a link or two. The chandelier calculator works out the height and width for your exact table.

Rooms you walk through

In a living room, bedroom, hallway or entry, the fixture hangs over open floor, so the rule changes: keep at least 7 ft (84″, 213 cm) between the floor and its lowest point. That single limit decides what kind of fixture your ceiling can take.

If a chandelier hangs over a coffee table or a bed where nobody walks, it can come a little lower, but the 7 ft rule is still the safer default. People rarely stay where furniture plans put them.

Two-story foyers and stairwells

In a two-story entry, the chandelier is seen from the front door, from the stairs and from the landing above, so height is about how it looks from all three. Two approaches work:

An 18 ft foyer: the fixture is centered on the upstairs window, which leaves its bottom well above the 7 ft minimum.

On a staircase, measure the 7 ft from the stair directly below the fixture, not from the floor at the bottom. A fixture that clears the bottom step easily can be at head height three steps up.

Over a bathtub or bed

Bathtubs. A chandelier over a tub is popular in photos and tightly limited by code. The US electrical code (NEC 410.10(D)) keeps hanging fixtures out of the space 3 ft around and 8 ft above the tub rim or shower threshold. In practice, the bottom of the fixture has to be at least 8 ft above the rim, so you need a ceiling of about 11 ft or more. It must also be rated for damp locations. Check your local code before you buy.

Beds. Hang it so you can sit up and swing your legs out of bed without reaching it. In most bedrooms, that means following the 7 ft rule anyway, because you walk around the bed to make it.

Working out the chain length

Once you know the height, the chain or rod length is simple subtraction. The chain length calculator does it for chain, rods or cord:

Chain length = ceiling height − (table height + hanging gap + fixture height + canopy)

Example: a 9 ft (108″) ceiling, a 30″ table, a 36″ gap, a 24″ tall fixture and a 3″ canopy. 108 − (30 + 36 + 24 + 3) = 15″ of chain.

Most chandeliers ship with more chain than you need, so plan to remove links. Remove them in pairs if the chain has a twisted pattern, so it still hangs straight. If the fixture uses rods, you can only adjust in steps of whole rods, so pick the combination that lands within your range. With a heavy fixture, turn off the power at the breaker and have someone hold it while you adjust. Fixtures over 50 lb (23 kg) need a ceiling box rated for their weight.

Common questions

How high should a chandelier be above a table with a 9 ft ceiling?

33–39″ (84–99 cm) above the tabletop. On a standard 30″ table, that's 63–69″ above the floor.

Do you measure to the bottom of the crystals?

Yes. Measure to the lowest point of anything hanging from the fixture, whether it's crystals, beads or a finial.

Can a chandelier hang too low over a table?

Yes. Below about 28″, it blocks the view across the table and gets in the way when people stand up or pass dishes.

How do I hang a chandelier on a sloped ceiling?

Use a canopy or adapter rated for sloped ceilings, so the chain or rod hangs straight down. Measure the height from the table or floor below the fixture, not from the ceiling.

What if my ceiling box isn't centered over the table?

Hang the chain from a swag hook centered over the table and drape the extra chain back to the box, or have an electrician move the box.