The difference between a room that feels flat and one that feels finished is rarely the fixtures themselves. It's how many sources of light there are, where they sit, and whether you can control them separately. Lighting designers call this layering, and it works in any home, whatever your budget.
The three layers
| Layer | Its job | Typical fixtures |
|---|---|---|
| Ambient | Lets you see and move around safely | Ceiling fixtures, recessed lights, chandeliers, fan lights |
| Task | Bright, focused light where you do things | Desk and reading lamps, under-cabinet lights, vanity lights, island pendants |
| Accent | Adds depth and draws the eye | Picture lights, wall washers, uplights, sconces, shelf and cabinet lights |
Some designers add a fourth, decorative layer: fixtures like chandeliers and statement pendants that are there to be looked at as much as to give light. In practice, most decorative fixtures also do one of the other three jobs.
How bright each layer should be
- Ambient carries most of the room's light. Size it with the lumens calculator, and put it on a dimmer so it can drop back when the other layers are on.
- Task light only needs to cover the work surface, but it should be about twice as bright as the room around it. Kitchen counters, for example, need about 70–80 lumens per square foot, against 30–40 for the rest of the kitchen.
- Accent light needs contrast to work. A common designer rule is that a highlighted object should be about three times brighter than its surroundings. Any less and it doesn't stand out.
Light at different heights
A room lit only from the ceiling looks flat, because everything is lit from the same direction. Spread your sources across three heights:
- High: ceiling fixtures and recessed lights.
- Middle: wall sconces, pendants and picture lights, around eye level.
- Low: table and floor lamps, under-cabinet lights and uplights.
This is where the sconce calculator and the pendant calculator come in: middle-height light only works if it's at the right height.
Switches and dimmers
Layers only help if you can control them separately. Put each layer on its own switch or dimmer, so you can have bright ambient light for cleaning, task light alone for reading, and accent light plus dimmed ambient for the evening. Smart dimmers can save these as scenes. If your dimmed LEDs misbehave, see why LED lights flicker on a dimmer.
Keep the same color temperature across all layers in a room. A warm lamp beside a cool ceiling light looks like a mistake (see color temperature by room).
Room-by-room recipes
Living room Full plan
Ambient: a ceiling fixture sized with the room light calculator, or dimmable recessed lights. Task: a floor or table lamp beside each main seat. Accent: picture lights on art, sconces either side of a fireplace, or LED strips in shelves.
Kitchen Full plan
Ambient: recessed lights laid out with the recessed lighting calculator. Task: under-cabinet lights along every counter, plus pendants over the island. Accent: lights inside glass cabinets, or toe-kick strips that double as a night light.
Dining room
Ambient and decorative: a chandelier on a dimmer, sized with the chandelier calculator. Task: lamps on a sideboard for serving. Accent: a pair of sconces or a picture light, so the chandelier isn't doing everything.
Bedroom Full plan
Ambient: a flush ceiling light or a ceiling fan with a light kit. Task: bedside sconces or lamps, one per side. Accent: a light in the closet, or a low-level strip under the bed for night-time.
Bathroom Full plan
Task: lights beside or above the mirror, sized with the vanity light calculator. Ambient: a ceiling light or recessed lights, damp-rated. Accent: a dim toe-kick or night light for late-night trips.
Home office Full plan
Ambient: a ceiling fixture at 3500–4000K. Task: a desk lamp on the side opposite your writing hand, so your hand doesn't shadow the page. Accent: a soft light behind the monitor to reduce the contrast between the bright screen and a dark wall.
Common mistakes
- A grid of recessed lights and nothing else. It lights the floor evenly and leaves walls and faces flat.
- One bright fixture in the middle of the ceiling. It casts hard shadows and makes the room's edges feel dim.
- Every light on one switch. You lose all the flexibility layering gives you.
- Bare bulbs at eye level. Shade them, or choose fixtures that hide the light source, to avoid glare.