How to calculate the lumens a room needs
Lighting levels are measured in foot-candles: one foot-candle is one lumen spread over one square foot. So the total lumens a room needs is its area times the foot-candles recommended for what you do in it.
Lumens = length × width (sq ft) × foot-candles
Example: a 14 × 12 ft dining room is 168 sq ft. At 30–40 foot-candles, that's 5,040–6,720 lumens, or 7–9 bulbs of 800 lumens each.
In metric, the unit is lux: one lumen per square meter. Multiply the room's area in m² by the lux level. The calculator switches to lux when you choose m / cm.
Recommended lumens by room
| Room | Foot-candles | Lux | Lumens per 100 sq ft | Color temperature |
|---|---|---|---|---|
| Hallway or stairs | 5–10 | 54–108 | 500–1,000 | 2700–3000K |
| Living room | 10–20 | 108–215 | 1,000–2,000 | 2700–3000K |
| Bedroom | 10–20 | 108–215 | 1,000–2,000 | 2700K |
| Dining room | 30–40 | 323–431 | 3,000–4,000 | 2700–3000K |
| Kitchen, general | 30–40 | 323–431 | 3,000–4,000 | 3000–3500K |
| Home office | 30–50 | 323–538 | 3,000–5,000 | 3500–4000K |
| Kitchen counters | 70–80 | 753–861 | 7,000–8,000 | 3000–4000K |
| Bathroom | 70–80 | 753–861 | 7,000–8,000 | 3000K |
Where the numbers disagree
These are the ranges most US lighting retailers publish, including Home Depot. Lists credited to the Illuminating Engineering Society give a lower 20–50 foot-candles for bathrooms and a higher 20–50 for bedrooms. In practice, bathrooms need strong light at the mirror and much less elsewhere, and bedrooms need adjustable light. That's why the calculator gives a range and suggests a dimmer.
Watts to lumens
Old bulbs were sold by watts, which measure power use, not brightness. LED bulbs use far fewer watts for the same light, so compare lumens instead. ENERGY STAR lists these minimum lumens to replace each incandescent wattage:
| Old incandescent | Minimum lumens |
|---|---|
| 40 W | 450 |
| 60 W | 800 |
| 75 W | 1,100 |
| 100 W | 1,600 |
| 150 W | 2,600 |
LED wattage for the same lumens varies by brand and bulb type, so read the lumens on the box rather than going by watts. Among bulbs with the same lumens, the one with the lowest wattage costs least to run.
Spreading the light
The total is the light a room needs from all its sources together: ceiling lights, lamps, wall lights and under-cabinet lights. A room lit by one very bright ceiling fixture feels harsh, while the same lumens spread across three or four sources feel comfortable. Designers call this layering: general light overhead, task light where you work or read, and accent light on walls or art.
Put the main lights on dimmers where you can, and see color temperature by room to choose the right white. A dimmer lets one setup cover both ends of the range: bright for cleaning, low for a film.