How wide should a chandelier be over a dining table?
Size the chandelier to the table, not the room. Multiply the table's width by ½ and by ⅔: anything between those two numbers will look in proportion. Then check that the fixture stays at least 6″ inside each edge of the table, so nobody hits it when they stand up and it doesn't hang over seated guests.
The chandelier size chart covers more table sizes, plus room sizes and ceiling heights.
Example: a 72 × 40″ table. 40 × ½ = 20″ and 40 × ⅔ ≈ 27″, so shop for a chandelier 20–27″ wide. A 24″ fixture sits right in the middle.
| Table | Usually seats | Chandelier width | In cm |
|---|---|---|---|
| 36″ round | 4 | 18–24″ | 46–61 cm |
| 48″ round | 4–6 | 24–32″ | 61–81 cm |
| 60″ round | 6–8 | 30–40″ | 76–102 cm |
| 60 × 36″ rectangle | 4–6 | 18–24″ | 46–61 cm |
| 72 × 40″ rectangle | 6 | 20–27″, or linear 36–48″ | 51–68 cm |
| 84 × 42″ rectangle | 8 | 21–28″, or linear 42–56″ | 53–71 cm |
| 96 × 42″ rectangle | 8–10 | 21–28″, or linear 48–64″ | 53–71 cm |
How high to hang a chandelier over a table
With an 8 ft ceiling, the bottom of the chandelier should sit 30–36″ above the tabletop. For every foot of ceiling above 8 ft, raise it about 3″ so it stays in proportion with the room. Always measure from the top of the table, not from the floor.
| Ceiling height | Above the table | Above the floor |
|---|---|---|
| 8 ft (2.44 m) | 30–36″ (76–91 cm) | 60–66″ (152–168 cm) |
| 9 ft (2.74 m) | 33–39″ (84–99 cm) | 63–69″ (160–175 cm) |
| 10 ft (3.05 m) | 36–42″ (91–107 cm) | 66–72″ (168–183 cm) |
| 11 ft (3.35 m) | 39–45″ (99–114 cm) | 69–75″ (175–191 cm) |
| 12 ft (3.66 m) | 42–48″ (107–122 cm) | 72–78″ (183–198 cm) |
Published guides don't fully agree here. Some lighting retailers say 28–32″ above the table, others 30–36″ or 32–34″. The overlap, around 30–34″ for an 8 ft ceiling, works in almost any dining room. The calculator shows the wider common range and adjusts it for your ceiling. For entries, stairwells and other rooms, see how high to hang a chandelier.
A quick test once it's up: sit down and look across the table. You should see the face of the person opposite under the fixture, not a lampshade.
How tall should the chandelier be?
A common designer rule is 2.5–3″ of fixture height for every foot of ceiling height. With a 9 ft ceiling that's a fixture body about 23–27″ tall. That height doesn't include the chain or rod, and the whole thing still has to fit between the ceiling and your hanging height. The calculator shrinks the range when your ceiling is too low for it. Once you've bought the fixture, the chain length calculator tells you how many links to remove.
Long tables: a linear chandelier or two fixtures?
When a table is much longer than it is wide, a single round chandelier sized to the width looks lost in the middle. Two options work well:
- One linear fixture ½ to ⅔ as long as the table, ending at least 12″ before each end. On a 96″ table that's 48–64″.
- Two matching fixtures hung a quarter of the way in from each end. On a 96″ table, that's 24″ and 72″ from one end. Size each one to the width rule, or slightly smaller.
Does the size of the room matter?
Designers also use a room formula: add the room's length and width in feet, and use that number in inches as the fixture width. A 12 × 14 ft room gives 26″. That's the right rule when nothing sits under the light, like in an entry or a living room. Over a table, the table rule wins, and the room rule is a sanity check. If the room rule gives a much smaller number, stay at the low end of the table range. The room light calculator uses this formula.
Mistakes to avoid
- Centering on the room instead of the table. If the ceiling box is off-center, use a swag hook or have an electrician move it.
- Sizing for the table with its leaves in when you only extend it a few times a year. Size for the length you use most.
- Measuring the height from the floor. Tables vary from 28″ to 31″; always measure from the tabletop.
- Forgetting the weight. Ceiling boxes are usually rated for fixtures up to 50 lb (23 kg). Anything heavier needs a box rated for that weight or separate support.