What size vanity light for your mirror?
Aim for a light about ¾ the width of the mirror: anywhere from 70% to 80% looks right. Never go wider than the mirror itself, or the light looks like it's hanging off the edges. If your mirror is wider than the vanity, size to the vanity instead.
| Mirror width | Light width | In cm | Typical fixture |
|---|---|---|---|
| 24″ (61 cm) | 17–19″ | 43–49 cm | 2-light |
| 30″ (76 cm) | 21–24″ | 53–61 cm | 3-light |
| 36″ (91 cm) | 25–29″ | 64–73 cm | 3- or 4-light |
| 48″ (122 cm) | 34–38″ | 85–98 cm | 4-light |
| 60″ (152 cm) | 42–48″ | 107–122 cm | 5-light, or two fixtures |
On a double vanity, you have two good options. Over one wide mirror, use a single long fixture sized the same way. Over two separate mirrors, center a light over each one.
How high to mount a vanity light
Put the bottom of the light about 2–4″ above the top of the mirror. With a typical mirror, that places the center of the electrical box 75–80″ above the floor, which is the range most electricians work to. If your mirror is lower or higher than usual, follow the mirror: a light that hugs the mirror looks intentional, and a light floating well above it doesn't.
Example: a mirror whose top sits at 72″. The light's bottom goes at about 75″. With a typical 8″ tall fixture, the box center lands at 79″.
Very tall mirrors push an overhead light too high. Light coming from above 84″ or so lands on the top of your head and leaves shadows under your eyes and chin. In that case, side sconces do a better job.
Sconces beside the mirror: the best light for faces
Lighting designers prefer sconces on each side of the mirror because the light hits your face straight on from both sides, with no shadows. To work, they need to be close together and at face height:
- Height: center the sconces 60–66″ above the floor, roughly at eye level for most adults.
- Spacing: 36–40″ apart, center to center, with each one about 3–4″ outside the mirror's edge.
- Wide mirrors: with a mirror wider than about 27″, sconces at the edges end up more than 40″ apart, and the middle of your face goes dim. Add a light above the mirror as well, or use sconces mounted on the mirror itself.
Choosing bulbs for a bathroom
Pick a color temperature of 2700–3000K, warm to soft white, which flatters skin without looking yellow. Look for a CRI (color rendering index) of 90 or higher, so makeup and skin tones look the same in the mirror as they do outside. Fixtures with glass shades that send light forward light faces better than ones that only point down at the sink.
For the rest of the room, including ceiling and shower lights, see the complete bathroom lighting plan.
Safety: damp ratings and the tub zone
Bathroom fixtures need to be rated for damp locations, and anything inside a shower needs a wet rating. The US electrical code (NEC 410.10(D)) also keeps hanging fixtures, pendants and ceiling fans out of the zone 3 ft around and 8 ft above a bathtub rim or shower threshold. Local codes vary, so have a licensed electrician confirm before installing.